DE210 P light is on but calls cannot be made.

hello,
please run the command:
zap show channels? if show your zap channels, it should be ok.
pri show spans? it must be up and active, then you can make calls
regards!
James.zhu

[trixbox1.localdomain ~]# asterisk -r
Asterisk 1.4.21.2-2 RPM by This email address is being protected from spambots. You need JavaScript enabled to view it., Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <This email address is being protected from spambots. You need JavaScript enabled to view it.>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.4.21.2-2 RPM by This email address is being protected from spambots. You need JavaScript enabled to view it. currently running on trixbox1 (pid = 2562)
Verbosity is at least 3
== Primary D-Channel on span 1 down
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 down
-- B-channel 0/1 successfully restarted on span 2
-- B-channel 0/2 successfully restarted on span 2
== Primary D-Channel on span 1 up
trixbox1*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo default en default
1 from-zaptel en default
2 from-zaptel en default
3 from-zaptel en default
4 from-zaptel en default
5 from-zaptel en default
6 from-zaptel en default
7 from-zaptel en default
8 from-zaptel en default
9 from-zaptel en default
10 from-zaptel en default
11 from-zaptel en default
12 from-zaptel en default
13 from-zaptel en default
14 from-zaptel en default
15 from-zaptel en default
17 from-zaptel en default
18 from-zaptel en default
19 from-zaptel en default
20 from-zaptel en default
21 from-zaptel en default
22 from-zaptel en default
23 from-zaptel en default
24 from-zaptel en default
25 from-zaptel en default
26 from-zaptel en default
27 from-zaptel en default
28 from-zaptel en default
29 from-zaptel en default
30 from-zaptel en default
31 from-zaptel en default
32 from-zaptel en default
33 from-zaptel en default
34 from-zaptel en default
35 from-zaptel en default
36 from-zaptel en default
37 from-zaptel en default
38 from-zaptel en default
39 from-zaptel en default
40 from-zaptel en default
41 from-zaptel en default
42 from-zaptel en default
43 from-zaptel en default
44 from-zaptel en default
45 from-zaptel en default
46 from-zaptel en default
48 from-zaptel en default
49 from-zaptel en default
50 from-zaptel en default
51 from-zaptel en default
52 from-zaptel en default
53 from-zaptel en default
54 from-zaptel en default
55 from-zaptel en default
56 from-zaptel en default
57 from-zaptel en default
58 from-zaptel en default
59 from-zaptel en default
60 from-zaptel en default
61 from-zaptel en default
62 from-zaptel en default
== Primary D-Channel on span 1 down
-- B-channel 0/3 successfully restarted on span 2
-- B-channel 0/4 successfully restarted on span 2
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 down
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 down
-- Executing [90860006420@default:1] Dial("SIP/503-097782d0", "Zap/g1/0860006420") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel 'SIP/503-097782d0' status is 'CHANUNAVAIL'
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 down
== Primary D-Channel on span 1 up
== Restart on requested on entire span 1
== Primary D-Channel on span 2 up
trixbox1*CLI> pri show spans
PRI span 1/0: Provisioned, Up, Active
PRI span 2/0: Provisioned, Up, Active
trixbox1*CLI>


I don't understand about D-Channel on span 1 down - up?
If I switch line ,It shows command,
== Primary D-Channel on span 2 down
-- B-channel 0/3 successfully restarted on span 1
-- B-channel 0/4 successfully restarted on span 1
== Primary D-Channel on span 2 up
but 'zap show channels' and 'pri show spans' same.


thank you

i] Last edited by Tridate at 2009-3-19 13:36 [/i

hello,
please check:
1) set it all to switchtype = euroisdn, i found that in zapata.ocnf is national.
2) show me: cat /proc/interrupt, do not share IRQ with other devices.
3) check the physical connection
4) make sure the timing is sync
regards!
James.zhu

[trixbox1.localdomain ~]# cat /proc/interrupts
CPU0
0: 95785085 IO-APIC-edge timer
1: 940 IO-APIC-edge i8042
6: 6 IO-APIC-edge floppy
7: 2 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 4 IO-APIC-edge i8042
14: 859752 IO-APIC-edge ide0
169: 95758758 IO-APIC-level uhci_hcd:usb5, wct2xxp, HDA Intel
177: 89745 IO-APIC-level eth0
209: 0 IO-APIC-level uhci_hcd:usb4
217: 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2
225: 27701 IO-APIC-level uhci_hcd:usb3, libata, vgsm2
NMI: 0
LOC: 93834215
ERR: 0
MIS: 0

PABX : FORTH D-400CID

thank you

hello,
please remove your HDA intel sound card or change the card to other slot.
james.zhu

i did disable HDA. as below..
Another PCI slot in my system, i also have GSM card (voismart GSM 4 channels). do i need config anything on GSM card slot to let your DE210 P work?


[trixbox1.localdomain ~]# cat /proc/interrupts
CPU0
0: 248121 IO-APIC-edge timer
1: 202 IO-APIC-edge i8042
6: 6 IO-APIC-edge floppy
7: 2 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
12: 4 IO-APIC-edge i8042
14: 2052 IO-APIC-edge ide0
169: 226038 IO-APIC-level uhci_hcd:usb5, wct2xxp
177: 396 IO-APIC-level eth0
209: 0 IO-APIC-level uhci_hcd:usb4
217: 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2
225: 5524 IO-APIC-level uhci_hcd:usb3, libata, vgsm2
NMI: 0
LOC: 243250
ERR: 0
MIS: 0
and i use,
[trixbox1.localdomain ~]# lspci -v | grep IRQ
Flags: bus master, fast devsel, latency 0, IRQ 10
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Flags: bus master, medium devsel, latency 0, IRQ 217
Flags: bus master, medium devsel, latency 0, IRQ 225
Flags: bus master, medium devsel, latency 0, IRQ 209
Flags: bus master, medium devsel, latency 0, IRQ 169
Flags: bus master, medium devsel, latency 0, IRQ 217
Flags: bus master, medium devsel, latency 0, IRQ 209
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 225
Flags: medium devsel, IRQ 225
Flags: bus master, fast devsel, latency 0, IRQ 177
Capabilities: [70] Express Endpoint IRQ 1
Flags: slow devsel, IRQ 225
Flags: bus master, medium devsel, latency 32, IRQ 169
[trixbox1.localdomain ~]#

Thank you

i] Last edited by Tridate at 2009-3-19 16:23 [/i